I need to print out a PLC 2 ladder, but I don't know how.

plctechweg

Member
Join Date
Sep 2020
Location
Fort Wayne
Posts
5
Hi,
I just recently had to add some safety features to an older machine. I made some changes to the PLC 2 logic for the new features. I don't have access to a printer which can communicate with the IBM 95 I used for the changes. How do I create a usable visual document of the PLC ladder to print out and place in the cabinet for troubleshooting purposes? It looks like other people have asked this and some of you have a program which can create that type of document. Thanks in advance for any assistance.
 
What software for the old PLC-2 ? 6200 ?
From memory for the 6200 software for PLC5 it was possible to save the program as a text file. The Ladder code being represented by ASCII characters.
So you just have to get the text file off the PC by some means - floppy ?
 
I remember printing a PLC2 project from the terminal that had to use tape backups, on a greenbar dot matrix that took about 45 minutes to print the few hundred pages

Ahhh, the good ole days.....
 

Similar Topics

Hi all, Anyone here that stil uses NT suport tool for Omron hmi. I can't get my version running on my laptop, so maybe someone here can make a...
Replies
7
Views
3,565
Please print to pdf I dont have the software. Thank you Where are the comments stored?
Replies
3
Views
1,806
Dear Sirs, How can we get the temperature values from printer using communication b/w TD-200 (Rs232c) - Printer (Lpt)while the temp values are...
Replies
1
Views
2,826
How do I print old dos program to windows need to print old Allen Bradley PCIS SLC 100 PROGRAM.
Replies
4
Views
5,418
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
61
Back
Top Bottom