Pete_S
Member
Hi,
I am looking to procure an ET 200S with a IM151-8 PN/DP module to perform some testing and potentially enhance our product and I was hoping some users that have experience with this hardware could answer some questions for me:
1) Is my understanding that this is a turn key piece of hardware correct?:
https://www.ebay.com/itm/Siemens-6E...AOSwvTpaH4qO:sc:FedExHomeDelivery!02118!US!-1
2) My understanding is the most common user story with this hardware is as a Remote I/O drop. My research shows that the IM151 module in essence has a S7-314 CPU. Do any users know if TCP/IP communication to the S7-314 possible through the ET-200 ethernet ports in this user story, IE so an OPC server with a Siemens driver could hit the module directly rather than through the parent S7 controller that has this hardware configured as a Profinet node?
3) Does answer to #2 change if the programming is done in Step 7 Classic vs TIA Portal?
Thanks!
I am looking to procure an ET 200S with a IM151-8 PN/DP module to perform some testing and potentially enhance our product and I was hoping some users that have experience with this hardware could answer some questions for me:
1) Is my understanding that this is a turn key piece of hardware correct?:
https://www.ebay.com/itm/Siemens-6E...AOSwvTpaH4qO:sc:FedExHomeDelivery!02118!US!-1
2) My understanding is the most common user story with this hardware is as a Remote I/O drop. My research shows that the IM151 module in essence has a S7-314 CPU. Do any users know if TCP/IP communication to the S7-314 possible through the ET-200 ethernet ports in this user story, IE so an OPC server with a Siemens driver could hit the module directly rather than through the parent S7 controller that has this hardware configured as a Profinet node?
3) Does answer to #2 change if the programming is done in Step 7 Classic vs TIA Portal?
Thanks!
Last edited: