Was wondering if there are any issues with chaining the enable jumpers of 2 like drives together. As in putting a go/no-go button inbetween them and then pushing it resulting in both drives not running.
So on my pflex4 the jumper from 1 to 11 is the enable jumper and I want to chain 2 of them through a go/no-go button.
Any issues with this??
Thanks
So on my pflex4 the jumper from 1 to 11 is the enable jumper and I want to chain 2 of them through a go/no-go button.
Any issues with this??
Thanks