I have built my first 3d printer. I used a k8200 kit that was gifted to me and gave it a z-axis upgrade and direct drive extruder. I am in the process of commissioning but have a problem. I have the Marlin firmware loaded onto my arudino mega, and am using repetier to connect. I have all the axis moving the way they need to and homed. The extruder is set. But when i try to heat the bed or extruder independently they do nothing. If i have them both on they heat, but once the extruder is up to temp, the bed has yet to hit the temp and the repetier software is saying i am still giving an output to the bed, but it won't turn on until the extruder heats. Any help? I attached the firmware.
Thanks
Thanks