Kingfisher Series 2 to Allen Bradley Panel View 300

jezzalanka

Member
J
Join Date
Mar 2010
Location
Hervey Bay
Posts
1
Hello Forum,

Has anyone trialled interfacing the Kingfisher Series 2 to a Allen-Bradley Panel View 300 using the Allen-Bradley DF1 driver?

Can it be done?

If it can't be done, can anyone recommend an operator panel which can be easily interfaced to the Kingfisher Series 2?

Many Thanks in Advance,
Jeremy
 

Similar Topics

I
Citect SCADA ver 7.5 with Kingfisher RTU
I am new to Citect SCADA and I am building the graphics for a page that will contain the control of a plant by a Kingfisher RTU. The project I...
Replies
0
Views
278
integration
I
moistcat
Modbus driver for Kingfisher RTU
Does anyone know where I would be able to find the modbus driver for Kingfisher Series 2? (CP-11 CPU). Toolbox32 is asking for a *.d32 file...
Replies
2
Views
1,391
moistcat
moistcat
V
Citect with Kingfisher on Modbus TCP
I am currently trying to do the communications between KingFisher PLC CP30 with Citect. Clients are trying to run using KingFish protocol on...
Replies
1
Views
4,469
vynnyc
V
C
Kingfisher to Prosoft issues
I have an installation with a very strange phenomenon. Hardware is as follows: ControlLogix rack with Prosoft MVI56 (modbus module) Kingfisher...
Replies
1
Views
2,207
CraigM
C
S
Kingfisher RTU
Hello I need some manual of hardware and sofware of kingfisher RTU.. Thank´s
Replies
1
Views
2,188
Eric Nelson
Eric Nelson
Back
Top Bottom