Soggy Canuck
Lifetime Supporting Member
I have a Koyo SU-6B PLC that is on a machine that was relocated from the continent. It has lost it's program. This model has a front mount slot to hold a plug-in eeprom module as well as an IC eeprom in a side compartment of the processor.
Does anyone know the procedure to switch from the removable eeprom to the IC eeprom using DirectSOFT32 software package? I suspect the battery weakened and lost the resident program.
Does anyone know the procedure to switch from the removable eeprom to the IC eeprom using DirectSOFT32 software package? I suspect the battery weakened and lost the resident program.