bdossantos
Member
Is there any way to recover a L33ER flashing red OK light or is it just a paper weight?
L33ER Flashing red OK light
- Thread starter bdossantos
- Start date
bdossantos
Member
OP
Flashed the firmware to 32. its rocking and rolling now. thank you
dmroeder
Lifetime Supporting Member
Was this a brand new controller out of the box?
bdossantos
Member
OP
No this was a production PLC. Believe it experienced several power outages in a short period of time. IP was still intact.
Similar Topics
Hey guys,
On my system, i got prop valve controling cylinder on the left and right to adjust the center of a lumber before it get in a woodmill...
Hi Friends,
I have an upcoming project were I need 20 pcs of ModBus TCP Clients / AOI. to control 10 devices
I use 20 transactions to control 10...
We have a machine that has a 1769-L33ER and we were wanting to connect it to our plant network. Currently has a local network for drives and HMI...
So, here's the situation the best I can explain it.
I have a 1769-L33Er that uses a set of recipes selected by the customer via FT SE on a...
I'm trying to get an upload from a machine for backup purposes. The upload seems to work fine but at the end I get errors and no upload. It...