I am using an Compactlogix L23E PLC Revision 20. And a Proface IPC Series PS-3651A HMI. I am working with GP Pro EX V4. I am communicating from the PLC to the HMI Via Ehternet IP.
I created a new program in GP Pro and when I imported my L5K file that I exported from the PLC and I look at the System area start address in the GP Pro EX program. It reads [PLC1]Local:1:I.Data. If I try to click on the Enable system Data area check box. I get an error that reads, address out of range Check the address and selected items. Also, none of the data that I have in the PLC is enabled on the HMI. Any help would be greatly appreciated
I created a new program in GP Pro and when I imported my L5K file that I exported from the PLC and I look at the System area start address in the GP Pro EX program. It reads [PLC1]Local:1:I.Data. If I try to click on the Enable system Data area check box. I get an error that reads, address out of range Check the address and selected items. Also, none of the data that I have in the PLC is enabled on the HMI. Any help would be greatly appreciated