Hey if anyone can please tell me how OSR can be used in the Logixpro?
I've got a problem in bottleline simulation. when the bottle reaches a certain location for filling, I stop the conveyor by using a bit from B3:4. So i cannot run the conveyor again as that bit is still high. Now if anyone can tell me how to just take this signal as edge triggered from low to high.
I've got a problem in bottleline simulation. when the bottle reaches a certain location for filling, I stop the conveyor by using a bit from B3:4. So i cannot run the conveyor again as that bit is still high. Now if anyone can tell me how to just take this signal as edge triggered from low to high.