Logo rc230 program help

[devnul1]

I'm trying to create a simple program that runs like this:

Output 1: ON - 10mins
Out 1: off
delay: 60 seconds
Output 2: on - 10mins
Out 2: 0ff
delay: 60 seconds

Repeat while on.

I've created a program usings Siemens program, but I can't seem to figure out the delays.. if anyone is able to help, i've really been banging my head against the wall on the delay issue.

Thanks,

Devnull

 

[osmanmom]

post your program

 

[devnul1]

program included.

Thanks for any help you can provide.

 

[ken wilhelm]

your delays are with timers what controller are you running

 

[nehpets]

I'm unable to open your program, but have knocked up a very simple solution for you to adapt.

The presets need to be changed (I've shortened them to debug)

Steve

PS. not sure what format you required, so there is a ladder version and a function block version.

 

[devnul1]

Thanks so much! mine was close but the way the outputs were controlled was what was wrong.

Thanks!