I'm trying to create a simple program that runs like this:
Output 1: ON - 10mins
Out 1: off
delay: 60 seconds
Output 2: on - 10mins
Out 2: 0ff
delay: 60 seconds
Repeat while on.
I've created a program usings Siemens program, but I can't seem to figure out the delays.. if anyone is able to help, i've really been banging my head against the wall on the delay issue.
Thanks,
Devnull
Output 1: ON - 10mins
Out 1: off
delay: 60 seconds
Output 2: on - 10mins
Out 2: 0ff
delay: 60 seconds
Repeat while on.
I've created a program usings Siemens program, but I can't seem to figure out the delays.. if anyone is able to help, i've really been banging my head against the wall on the delay issue.
Thanks,
Devnull