looking for a screwdriver

[plchris]

Thinking about ordering this insulated screwdriver

 

[Aabeck]

What happens when one of those bits pulls out and stays in a live screw terminal?

Got an insulated needle nose plier?

 

[Bering C Sparky]

What happens when one of those bits pulls out and stays in a live screw terminal?

Got an insulated needle nose plier?

LOL....Opened an overboard pump starter last week and found a just such a bit sticking off the screw on the overload......"I wondered where that went". (Probably been there for 3 or 4 months)

Got new boots on, so no insulated needle nose were necessary.

BCS

 

[Bering C Sparky]

My bit came out of this screwdriver though, they are Stainless Steel and hold up much better in this salt water environment.

https://www.amazon.com/Megapro-151SS-Stainless-Driver-Yellow/dp/B004VJY99Y

 

[Kidblue]

Hi,

This range might help with those pesky IEC contactors! It has a straight edge built into the pozi style head...

http://www.poolandspapartsnow.com/c-k-tools-screwdriver-term-insulated-sz1-49045-1/

There are several different bit sizes to cover most of the screw types out there.

Regards,

Rob

 

[geniusintraining]

I've been using .....

I also sell Wera https://www.plccable.com/brands/Wera-Tools.html

I dont think you can beat the Diamond tips, they are by far the best and have been using Wera for about 10 years and will continue to use them as long as they are around

 

[Usireland]

I also sell Wera https://www.plccable.com/brands/Wera-Tools.html

I dont think you can beat the Diamond tips, they are by far the best and have been using Wera for about 10 years and will continue to use them as long as they are around

Could not agree more. Wera make excellent screwdrivers. I particularly like their "Reduced blade diameter" screwdrivers. Sure they're a little weaker but they fit absolutely anywhere.

http://products.wera.de/en/screwdrivers_kraftform_plus__series_100_vde.html

 

[danw]

Does Wera make a #2 or #1 pozi drive bit? I did not see one.

 

[Usireland]

Does Wera make a #2 or #1 pozi drive bit? I did not see one.

Yes, on their site they sell the PH 1 and PH2 on their own or in sets:

Normal blade diameter

Reduced blade diameter

Stainless steel normal blade diameter

Im not sure if PLC Cable sells them.

 

[boneless]

My bit came out of this screwdriver though, they are Stainless Steel and hold up much better in this salt water environment.

https://www.amazon.com/Megapro-151SS-Stainless-Driver-Yellow/dp/B004VJY99Y

Hold on, hold on... Stain-resistant right?

 

[geniusintraining]

Im not sure if PLC Cable sells them.

No we dont, like 99% of my other items I sell... we only sell what we use

We use cordless screwdrivers most of the time building trainers and cabinets and use the inserts in them but when going on troubleshooting calls Wera are in the tool buckets, they dont wear out or break, they just work

Automation Direct has good prices on them https://www.automationdirect.com/ad...ery=wera&categoryId=5262&TxnNumber=-1&start=0