mrdegold
Lifetime Supporting Member
Hi all
We were trouble shooting one of our machines this morning and found a bad prox. switch. We stole (or should I say borrowed) one from a newer unit we have in storage. Although it was not an identical switch the machines were made by the same manufacture and both switches perform the same function.
My problem is I would like to get the specifics of the switch before I order new ones to replace the “borrowed” one and put 1 or 2 into spare part inventory. But when I look for the switch on the web I only get confused.
I’m hoping someone can help me out. The label on the switch reads.
automatisme & controle
38180 SEYSSINS- FRANCE
DPA5 K 0-10V
24VCC
I’m not so much concerned with getting the exact same manufacture as I am with getting a switch which is electrically the same that I can just drop into place. If I could get the specs I could then easily match it up.
Thanks for the help
Michael
We were trouble shooting one of our machines this morning and found a bad prox. switch. We stole (or should I say borrowed) one from a newer unit we have in storage. Although it was not an identical switch the machines were made by the same manufacture and both switches perform the same function.
My problem is I would like to get the specifics of the switch before I order new ones to replace the “borrowed” one and put 1 or 2 into spare part inventory. But when I look for the switch on the web I only get confused.
I’m hoping someone can help me out. The label on the switch reads.
automatisme & controle
38180 SEYSSINS- FRANCE
DPA5 K 0-10V
24VCC
I’m not so much concerned with getting the exact same manufacture as I am with getting a switch which is electrically the same that I can just drop into place. If I could get the specs I could then easily match it up.
Thanks for the help
Michael