Lotus 123 Conversion

Tom Jenkins

Lifetime Supporting Member
Tom Jenkins
Join Date
Apr 2002
Location
Milwaukee, WI
Posts
6,301
I have an old file I used to develop some settings. It is in Lotus WK4 format. If someone has the ability to convert it to Excel format, could you please send me a Private Message? Thanks.
 
This forum is absolutely the greatest. I have gotten the file converted, it had the info I needed, and the updated calculations are on their way to the client.

Thanks to the forum, and thanks to Phil for giving us this great tool.

Tom
 

Similar Topics

C
ABB ACB - PR123 auxiliary circuit
Dear, i was looking at the wiring diagram of the auxiliary circuits of PR123 trip unit of ABB MCCB (attached) i was able to depict K51 output...
Replies
0
Views
1,575
Charbel
C
A
SEW IPOS Drive Assembler Code conversion to PLC Ladder Logic
I have a machine which is undergoing upgradation. As part of the process two SEW drives are being replaced., existing Gen B with new Gen C. The...
Replies
3
Views
199
JeffB
J
R
HMI conversion from ESA VT155W00000 to EXOR hmi
Currently I’m using ESA model VT155W0000 HMI and it’s communicate with Fanuc PLC. Can any one suggest can I convert ESA model to EXOR HMI eSMART07M
Replies
0
Views
88
Rajesh.
R
J
BCD Conversion error in s7 300 cpu 313C
hi... i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...
Replies
2
Views
117
L D[AR2P#0.0]
L
D
Modscan return value conversion
I have a Type C to RS485 adapter connect to my Siemens RWF55. I use modscan to scan it to get a value from the Siemens controller. In the...
Replies
4
Views
103
drbitboy
drbitboy
Back
Top Bottom