Hi Guys!
I'm running in a system using a SLC 5/05 and with some customer specific program traditions.
I have several sequences build the old fashioned way:
x1 Step2 Step1
--I I----I/I----( )
Step1 I
--I I--
Step1 x2 Step3 Step2
--I I---I I-----I/I-----( )
Step2 I
--I I--------
This is how the end customer wants the program written.
Now I need to be able to move from step 1 to step 2 to step 3 to .... manually from the operator interface and back again 3 -> 2 -> 1. Preferably using 2 buttons (Step forward and Step Back)
Any suggestions on how this can be accomplished? With as few program lines per sequence as possible?
Best regards,
Michal_dk
I'm running in a system using a SLC 5/05 and with some customer specific program traditions.
I have several sequences build the old fashioned way:
x1 Step2 Step1
--I I----I/I----( )
Step1 I
--I I--
Step1 x2 Step3 Step2
--I I---I I-----I/I-----( )
Step2 I
--I I--------
This is how the end customer wants the program written.
Now I need to be able to move from step 1 to step 2 to step 3 to .... manually from the operator interface and back again 3 -> 2 -> 1. Preferably using 2 buttons (Step forward and Step Back)
Any suggestions on how this can be accomplished? With as few program lines per sequence as possible?
Best regards,
Michal_dk