I trying to make a numeric entry send a bit to the plc when the operator enters a value on the keypad. I enabled notification and it has set on and set off but not a toggle option. Is there an easy way to achieve this without having to create a whole bunch of code?
Maple EZWarePlus
- Thread starter DonKnotts
- Start date
mendonsy
Member
One to do it is to set the PLC bit on with the HMI and then have the PLC turn the bit off when it recognizes the data. That's how I normally do it.
Similar Topics
hello,
I have a Maple Systems HMI5103L currently programed and running in conjunction with a AB 2080-LC50-24QWB. everything works fine data is...
I've been tasked with modifying a current hmi program for the addition being added to the cell (auto/manual ,I/O ,Status). When I try to upload...
Hi. We're refurbishing a used machine with a Maple HMI5070TH HMI. I'm trying to establish the log-in details. There are four users; operator...
Hello everyone,
I have a machine I'm working on that has a Maple HMI5070NLv2 and a Micrologix processor. I have the PLC running on RS500 emulate...
Good morning,
I have a small project coming up and I came across maple systems when looking for a cost effective HMI. What is your opinion on...