I am trying to modify a Maple Systems OIT to add security to some objects on a screen. I created a Login window with two numeric entries: one for user number (system word LW-9219), one for password (system word LW-9220). I also have a display (bit lamp) to indicate if there is a password mismatch (system bit LB-9060). This only updates when the password is updated.
The problem is, if someone goes and changes the user number from '1' to '2', the password indicator still shows that the user password is okay until they try to enter a password via the password numeric entry. I could see this being confusing to the customer.
Any ideas how I can have an indicator display the current combination is okay or not? I am curious if I will have to make a Macro or if there is some system value(s) that would be easier.
The problem is, if someone goes and changes the user number from '1' to '2', the password indicator still shows that the user password is okay until they try to enter a password via the password numeric entry. I could see this being confusing to the customer.
Any ideas how I can have an indicator display the current combination is okay or not? I am curious if I will have to make a Macro or if there is some system value(s) that would be easier.