Jyonny
Member
Hello again everybody,
I am making a new simple application with Micro 850 plc with 48 i/o.
The i/o are not sufficient for me, so I will buy a 2085-IQ16 and 2085-OW16 + 2085-ECR (terminator).
If I add the 2 modules to the CCW project, when I download the project the plc, it goes in fault (because the expansions are missing).
Is there any way to inhibit the modules?
(like I make in Logix for Control Logix and Compact Logix processors)
Is there anything similar for Micro 800 family?
Ot another way that let me test the system without removing the new i/o
associated to the 2085 expansion modules?
Thank you.
I am making a new simple application with Micro 850 plc with 48 i/o.
The i/o are not sufficient for me, so I will buy a 2085-IQ16 and 2085-OW16 + 2085-ECR (terminator).
If I add the 2 modules to the CCW project, when I download the project the plc, it goes in fault (because the expansions are missing).
Is there any way to inhibit the modules?
(like I make in Logix for Control Logix and Compact Logix processors)
Is there anything similar for Micro 800 family?
Ot another way that let me test the system without removing the new i/o
associated to the 2085 expansion modules?
Thank you.