fredjohns
Member
Where can I find information about the status files for a micrologix 1000. After a few months of running we had a fault displayed on the PLC. When we went online and checked the processor status this is what was shown:
Minor error at the end of the scan
Refer to S:5
Major Error Halt S:1/13
Major Error 20h
Any help will be greatly appreciated.
Fred Johns
Day Timer, Inc.
Minor error at the end of the scan
Refer to S:5
Major Error Halt S:1/13
Major Error 20h
Any help will be greatly appreciated.
Fred Johns
Day Timer, Inc.