glenncovington
Lifetime Supporting Member
I started working with a new 1762-L40AWAR Micrologix 1200 processor Ser. C Rev. G. today. Using RSLogix 5.5 Build 14, I downloaded my code and started debugging. This all worked fine for about an hour. I have a simple test program running to execute an AWT instruction to send a message to an LED Display from Alpha. I set CH0 to Ascii 4800 baud.
RSLinx 2.40.01 build 16 sees the processor and knows it is in a run mode, but RSLogix just throws up a message with Incompatible Processor. It will not let me Upload, Download, or go Online. I found one technote about an SCP instruction, but I do not have an SCP instruction in more code and at this point couldn't change it if I wanted to.
I have several other ML1200 Ser C that I can communicate to without a problem.
What do I do now. Is there a hardware reset?
Help
RSLinx 2.40.01 build 16 sees the processor and knows it is in a run mode, but RSLogix just throws up a message with Incompatible Processor. It will not let me Upload, Download, or go Online. I found one technote about an SCP instruction, but I do not have an SCP instruction in more code and at this point couldn't change it if I wanted to.
I have several other ML1200 Ser C that I can communicate to without a problem.
What do I do now. Is there a hardware reset?
Help