MikeSr
Member
Have not figured out how to get a triggered output from HSC:0 Mode 0,
"0 Up Counter - The accumulator is immediately cleared (0) when it reaches the high preset. A low preset cannot be defined in this mode."
When I reach the High Preset I need to run an addition instruction. Since the counter automatically resets, what output from the HSC is triggered first before the reset?
Oh, I need to use mode "0" as I need the other inputs for other things.
When I reach the High Preset I need to run an addition instruction. Since the counter automatically resets, what output from the HSC is triggered first before the reset?
Oh, I need to use mode "0" as I need the other inputs for other things.