coopee1979
Member
Hey guy's. I'm doing a Micrologix to Compact Logix conversion and ran into an issue with a COP command. My source in 500 is #N[N7:40]:0
Dest #N100:0
Length 100
My Studio program for the same COP instruction: Source N[COP_FROM_NUM]0
DEST: COPY_TO_FILE_1
<??>
LENGTH 100
I skipped this section of the conversion and went thru and edited a whole mess of tag errors, many dealing with the N7 file. Should I have created a giant array based on the entire N7 file and declared each element a different tag? Am I looking at this wrong? Or is the PLC conversion tool basically worthless?
Dest #N100:0
Length 100
My Studio program for the same COP instruction: Source N[COP_FROM_NUM]0
DEST: COPY_TO_FILE_1
<??>
LENGTH 100
I skipped this section of the conversion and went thru and edited a whole mess of tag errors, many dealing with the N7 file. Should I have created a giant array based on the entire N7 file and declared each element a different tag? Am I looking at this wrong? Or is the PLC conversion tool basically worthless?