harleymc100
Member
Hi all, ive posted a similar question before but decided to do a new post.
I have a ML1400 and a Weintek MT8071iE.
After connecting everything through a hub vie Ethernet. (ML1400 Chanel 1),
Im looking at the PLC connection guide in the manual. My options are in the image below.
I cant seem to see what configuration i would use? Considering it is all via Ethernet and it is a Micro(not a compact or a control logix).
Am i missing something??
Thanks in advance.
P.S. as a side note, everything pings nicely.
I have a ML1400 and a Weintek MT8071iE.
After connecting everything through a hub vie Ethernet. (ML1400 Chanel 1),
Im looking at the PLC connection guide in the manual. My options are in the image below.
I cant seem to see what configuration i would use? Considering it is all via Ethernet and it is a Micro(not a compact or a control logix).
Am i missing something??
Thanks in advance.
P.S. as a side note, everything pings nicely.