Good day sir,
I have a task to download a program in hmi and make some additional wirings.
The program used is gp pro ex v3.5 (first time to used) , then I checked the program and i found there is missing device in I/O driver but there is addressing inside of it.Im wondering if it is still able to work after I download it.
Display unit : GP 3000 series , AGP-3300S-CA1M
and the i/o driver based on the diagram should be: HTB1C0DM9LP
Thanks,
D
I have a task to download a program in hmi and make some additional wirings.
The program used is gp pro ex v3.5 (first time to used) , then I checked the program and i found there is missing device in I/O driver but there is addressing inside of it.Im wondering if it is still able to work after I download it.
Display unit : GP 3000 series , AGP-3300S-CA1M
and the i/o driver based on the diagram should be: HTB1C0DM9LP
Thanks,
D