Hi,
I have just wired up (might be incorrect) a Q Series PLC with an Input Card GX40-S1 and an Output Card GY40P.
my issue is now in software I fire the output, it shows on the small LED at the top the number of the output but no physical output comes on.
I have 24v into terminal 17 and 0v in terminal 18. Am i doing anything wrong.
Thanks
I have just wired up (might be incorrect) a Q Series PLC with an Input Card GX40-S1 and an Output Card GY40P.
my issue is now in software I fire the output, it shows on the small LED at the top the number of the output but no physical output comes on.
I have 24v into terminal 17 and 0v in terminal 18. Am i doing anything wrong.
Thanks
Last edited: