Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi All,
I am familiar with AB PLCs but never use with Mitsubhisi PLC (Melsec A1S series)
What I want to know is about analog I/O card addressing.
Let say, I want to MOV value that comes from analog input module CHANNEL 0 that located at slot 3 (AIS63ADA) to analog output(A1S62DA)CHANNEL 0 at slot4
In AB PLC (SLC series) this can be done use MOV I3:0 to O4:0.Simple..
How about with MELSEC PLC, anybody can help?
Thanks in advanced
Deer
I am familiar with AB PLCs but never use with Mitsubhisi PLC (Melsec A1S series)
What I want to know is about analog I/O card addressing.
Let say, I want to MOV value that comes from analog input module CHANNEL 0 that located at slot 3 (AIS63ADA) to analog output(A1S62DA)CHANNEL 0 at slot4
In AB PLC (SLC series) this can be done use MOV I3:0 to O4:0.Simple..
How about with MELSEC PLC, anybody can help?
Thanks in advanced
Deer