gareth.cantrill
Member
- Join Date
- Oct 2004
- Posts
- 51
Can anyone please explain the following error to me? I have created a very simple project and downloaded to a Q01. The processor remains in stop and will not run. I have determined that the following is what is stopping it. However, I do not understand what it is saying and what actions I should then take. Thanks.
Error code list[Error code 2200]
Applicable machine High performance model PLC, Process PLC
=====================================================================================
Error code(SD0) 2200
Error message MISSING PARA.
Common information(SD5-15) Drive name
Individual information(SD16-26) -
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
No parameter file exists at the drive designated by the parameter enable drive switch(DIP switch).
Corrective action
Check/correct the parameter enabled drive switch setting.
Designate a parameter file for the drive designated by the parameter enabled drive switch.
-------------------------------------------------------------------------------------
Applicable machine Basic model PLC
=====================================================================================
Error code(SD0) 2200
Error message MISSING PARA.
Common information(SD5-15) Drive name
Individual information(SD16-26) -
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
There is no parameter file at the program memory.
Corrective action
Check and correct the setting of the parameter enable drive switch.
Put a parameter file in the drive designated by the parameter enabled drive switch
Error code list[Error code 2200]
Applicable machine High performance model PLC, Process PLC
=====================================================================================
Error code(SD0) 2200
Error message MISSING PARA.
Common information(SD5-15) Drive name
Individual information(SD16-26) -
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
No parameter file exists at the drive designated by the parameter enable drive switch(DIP switch).
Corrective action
Check/correct the parameter enabled drive switch setting.
Designate a parameter file for the drive designated by the parameter enabled drive switch.
-------------------------------------------------------------------------------------
Applicable machine Basic model PLC
=====================================================================================
Error code(SD0) 2200
Error message MISSING PARA.
Common information(SD5-15) Drive name
Individual information(SD16-26) -
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
There is no parameter file at the program memory.
Corrective action
Check and correct the setting of the parameter enable drive switch.
Put a parameter file in the drive designated by the parameter enabled drive switch