Mas01
Member
This is a general question, so I'm just looking for help/advice or maybe where I should look to find this out...
I've created a new page on the GUI, which has got a bunch of parameters related to our cooling water system.
I want to make sure these parameters are logged for analysis after the rig has been run.
Is this normally configured in GTDesigner3, where the GUI screen/parameters are defined?
Thanks
I've created a new page on the GUI, which has got a bunch of parameters related to our cooling water system.
I want to make sure these parameters are logged for analysis after the rig has been run.
Is this normally configured in GTDesigner3, where the GUI screen/parameters are defined?
Thanks