ML1100 and PV400+

DaveW

Member
D
Join Date
Apr 2005
Location
SoCal
Posts
389
I want to use DF1 to communicate between my ML1100 (1763-L16BBB) and a PV400+ (2711P-K4M5D). Is there a standard cable I can buy to do this? I read the manual and it appears to say I need one of those AIC+. Please help.
 

Similar Topics

D
ML1100 to R30iB robot using MSG protocol
I'm looking to implement a low-cost, efficient method of communicating some integer values to an R30iB robot from a Rockwell 1100 PLC. I am not...
Replies
8
Views
1,735
DanCartier
D
C
ML1100 as Modbus RTU Master
Hello all, I am trying to setup my MicroLogix 1100 as a modbus RTU master for a modbus network containing multiple modbus RTU slaves. I currently...
Replies
7
Views
3,950
Ken Roach
Ken Roach
S
ML1100 D.I. causes memory loss
We have a machine that keeps losing its program at random intervals; sometimes 2x-3x in a shift, sometimes will go over 1wk without issue. I had a...
Replies
9
Views
2,957
geniusintraining
geniusintraining
B
Connecting a 4-20mA signal to the ML1100 0-10V Analog Input
Just asking for clarification here, but from my research all I need is a 500 ohm resistor across the AI and the common? Heres my schematic. I...
Replies
5
Views
2,601
parky
P
S
CLX>ML1100 MSG Instruction limit
I have a CLX L61 and I'm trying to read from and write to a Micrologix 1100. I'm attempting to read 200 REAL elements but I'm receiving an error...
Replies
2
Views
1,468
SpecialK87
S
Back
Top Bottom