lostcontrol
Lifetime Supporting Member
Hi,
We have a ML1100 with what appears to be a very noisy signal at normal operating speed.
Am trying to think of the best way to deal with this, whether it should be software or electrical.
If I were to do it in software, should I use a filter or averaging?
An example of how often/much it jumps is say, from 7.2 -> 8.9 every 5-10 seconds.
We have a ML1100 with what appears to be a very noisy signal at normal operating speed.
Am trying to think of the best way to deal with this, whether it should be software or electrical.
If I were to do it in software, should I use a filter or averaging?
An example of how often/much it jumps is say, from 7.2 -> 8.9 every 5-10 seconds.