Electrically_Bound
Member
Where in the world does a person check/modify the stop and parity bit settings on a ml1100? I am running RSLinx 500 version 7.20.00, and recently installed firmware revision 5 (I had the same "problem" before installing this latest revision). I also have the latest .eds file (if that is even relevant). I expected to see this in the channel 0 settings dialog box, but it is "missing." I also printed out the communication port settings and there is no mention of the parity and stop bit settings. (I tried to upload a picture of the dialog box, but my connection at work does not let me do this.)I have ASCII protocol selected.