Jiri Toman
Member
- Join Date
- Jun 2002
- Posts
- 498
I have to develop an HMI screen to change the time of the day clock in the Micrologix 1100. Unfortunatelly I don't have one available for test, I will have to do this at the job site. By reading the manual and help screens I can see that the RTC function file should be used for reading of the RTC data only, it says that I cannot write to it. Does that mean that in order to set the Real Time Clock I will need to write to status registers S:37 through S:42 and then read back from RTC:0 ? Or can I read back from S:37 through S:42? Just to make sure you that understand, I will need to be able to set the time and then read back the real time and date.
If anyone has done this or can test this for me I would appreciate your input, I don't feel like wasting my time at the job site.
Thanks
If anyone has done this or can test this for me I would appreciate your input, I don't feel like wasting my time at the job site.
Thanks