I have a ML 1400 communicating via MODBUS/TCP with a ABB SM500F chart recorder. The MODBUS registers 40001 and 40002 represent a 32 bit single precision float in IEEE format.
Example:
50.0 gpm readout on the display will indicate (16379) and (-12600)in the ML's registers in respect to the 40001 and 40002 MODBUS addresses.
My attempts to "COP #N30:0 F8:5 2" result in the following error "Operand sizes do not match"
Any help with this conversion would be appreciated. Its driving me freaking NUTS!
Example:
50.0 gpm readout on the display will indicate (16379) and (-12600)in the ML's registers in respect to the 40001 and 40002 MODBUS addresses.
My attempts to "COP #N30:0 F8:5 2" result in the following error "Operand sizes do not match"
Any help with this conversion would be appreciated. Its driving me freaking NUTS!