pravinshinde
Member
Hi all,I want to make communication between SLC 500 and Yokogawa drive through Modbus. I have MVI 156 module.Is there any document or procedure available ?
Modbus Communication between SLC 500 and Yokogawa Drive
- Thread starter pravinshinde
- Start date
Mickey
Lifetime Supporting Member
MVI56 I believe is for a ControlLogix ,the MVI46 is for a SLC500.
See links below for the manuals and sample programs from Prosoft.
http://www.prosoft-technology.com/content/view/full/13830
http://www.prosoft-technology.com/content/view/full/135
See links below for the manuals and sample programs from Prosoft.
http://www.prosoft-technology.com/content/view/full/13830
http://www.prosoft-technology.com/content/view/full/135
Similar Topics
Good day Programmers
I have a RSTi-EP CPE100 Standalone Controller from Emerson as well as a STXMBE001 (MODBUS TCP/IP) as a Modbus communication...
Hey Guys,
I am struggling to read data from a "JUMO" make controller using modbus RTU with MLX1400. The communication between the devices has...
Hi All,
I am using an Accuenergy Data Acquisition Server (https://www.accuenergy.com/products/aculink-810-data-acquisition-gateway-server/) to...
we use M580 which have an Modbus RTU port correct if iam wrong now should i have to read input data from ab micrologix through read var block and...
To execute MODWR and MODRD instruction of Delta PLC, I need address of register in VLT 2800 but I cannot figure out. Can any body help me? I want...