Hi,
I'm currently working on a machine equipped with Rockwell PowerFlex VFDs. I have one PowerFlex 753 (rev 6 or so) and two small PowerFlex 4M.
I configured them using DriveExecutive, all went well.
However I wonder if there's a way to visualise modified parameters or export a file that only contains these parameters. DriveExecutive can generate an XPS file with all params, but ideally I'd like to avoid sorting through all these lines.
Schneider ATVs have this functionality and it's quite practical when verifying the VFD config.
Thanks in advance, regards
I'm currently working on a machine equipped with Rockwell PowerFlex VFDs. I have one PowerFlex 753 (rev 6 or so) and two small PowerFlex 4M.
I configured them using DriveExecutive, all went well.
However I wonder if there's a way to visualise modified parameters or export a file that only contains these parameters. DriveExecutive can generate an XPS file with all params, but ideally I'd like to avoid sorting through all these lines.
Schneider ATVs have this functionality and it's quite practical when verifying the VFD config.
Thanks in advance, regards