Bering C Sparky
Lifetime Supporting Member
Hello Again,
I posted earlier in a different thread where I was having some FTVME problems.
I thought I had this all straitened out but this seems to want to give me fits at every turn today.
I Transfered a FTVME 5.10 Application into a laptop that is running FTVME 6.10.
After making all my new additions to the project I try to create a runtime application as 6.10, but get error message:
Unable to Save RSLinx Enterprise Data Server Info.
It then asks if you want to continue, say no and it closes say yes and it gives pop up error saying:
Validation Compleated w/errors, Runtime Application not Created.
If I try to make the application as version 5.10 then it says that the compactlogix controller that I have added to the party is not compatible with this version.
If I make the appication as version 6.00 then it creates the runtime no problem.
Then I go to transfer/download to the PV+1000.
I get Error message that firmware versions are not compatible.
Two Questions please.
1) Why wont it let me make the runtime as 6.10 to start with.
2) What do I need to do to flash the firmware of the PV+ to something that I can download this app to it and be done with it. And how to do this?
I have been awake for over 24 hours now and have at least 24 more to go after I finish this app before I can sleep. Starting to get slap happy.
I will continue to try to figure this out but any advise would be much appriciated.
Thanks,
BCS
I posted earlier in a different thread where I was having some FTVME problems.
I thought I had this all straitened out but this seems to want to give me fits at every turn today.
I Transfered a FTVME 5.10 Application into a laptop that is running FTVME 6.10.
After making all my new additions to the project I try to create a runtime application as 6.10, but get error message:
Unable to Save RSLinx Enterprise Data Server Info.
It then asks if you want to continue, say no and it closes say yes and it gives pop up error saying:
Validation Compleated w/errors, Runtime Application not Created.
If I try to make the application as version 5.10 then it says that the compactlogix controller that I have added to the party is not compatible with this version.
If I make the appication as version 6.00 then it creates the runtime no problem.
Then I go to transfer/download to the PV+1000.
I get Error message that firmware versions are not compatible.
Two Questions please.
1) Why wont it let me make the runtime as 6.10 to start with.
2) What do I need to do to flash the firmware of the PV+ to something that I can download this app to it and be done with it. And how to do this?
I have been awake for over 24 hours now and have at least 24 more to go after I finish this app before I can sleep. Starting to get slap happy.
I will continue to try to figure this out but any advise would be much appriciated.
Thanks,
BCS