Hi all, thank you for reading this post. it's been a while since I posted a thread. I hope you are well.
I have this new project requirement for naval sound signal with a horn in case of restricted visibility.
We need to alternate short-short-long or long-long-short values. These must then be spaced with a delay of about 2 minutes.
The client wants a push button that engage a sequence that will repeat until the switch is disengaged.
We have to use TwidoSuite for the project, but if anybody could explain the concept in Allen-Bradley that would be fine.
Much appreciated,
Mitureg.
I have this new project requirement for naval sound signal with a horn in case of restricted visibility.
We need to alternate short-short-long or long-long-short values. These must then be spaced with a delay of about 2 minutes.
The client wants a push button that engage a sequence that will repeat until the switch is disengaged.
We have to use TwidoSuite for the project, but if anybody could explain the concept in Allen-Bradley that would be fine.
Much appreciated,
Mitureg.