Drive-Motor Discussion
Well, Russ, I can understand your disgust at the lack of support you seem to be getting. I've had direct experience with both Robicon and Weg. I personally never had a problem with Weg and always liked their product. I was lucky, apparently, in not having to depend upon them for much technical support because the organization I was part of had many very good motor people in it. My years of rep'ing Robicon 10 years ago taught me that they were a professional embarassment and I was glad to leave them so as not to have them tainting my reputation. I have built my reputation, instead, on ABB and Reliance drives, and Reliance, Weg, and Marathon motors and have had 10 years of good experience with them. But enough of that. We need to get your situation in hand, if we can.
I think that it is essential that I get in my hands a copy of the Robicon 454GT instruction manual. You said you have more than one of these drives so I assume that you have more than one of their manuals. I'm asking you to mail me one of the manuals. I'm on record here promising to mail it back to you when we are done with this or whenever you ask for it back. Or, if you can get an extra copy from your Robicon rep, send that. It would be good if you would note in it as much as possible what parameters have been modified and what the custom settings are. I will get back to you with specific changes.
Just so no one thinks this thread is somehow going underground, I'm also on record that my recommendations will be reported here on this forum, as well.
Let me know if and how you can get a manual to me.