A vortex tube only needs a small hole compared to the opening required for an air conitioner. If the vortex tube proves the failures are not heat related, you have saved the cost of the A/C. But a vortex tube can be installed quickly, and cheaply, and possibly prove the case for A/C.
Mounting AC on PLC cabinet
- Thread starter aryaf
- Start date
Similar Topics
Obviously, it makes most sense to place PLCs into cabinets with little to no high voltage AC (230V & 460V) signals present to help reduce possible...
Is it possible to get just the mounting hardware if it happened to be misplaced before installation?
Thanks brothers.
Hello everyone.
Currently I am using Eplan p8 and faced (while creating a panel) with a challenge in finding a device called DIN mounting rail...
Do you know a supplier for the following item?
Similar parts and other brands are acceptable.
cooling fan for servomotor mounting
Rexroth...
Hello,
I was going to mount the Xformer to the panel and still can, but it was brought up that we should just bolt it to the bottom inside of the...
