wevie0037@
Member
Greetings,
I am trying to write a DINT value from a ControlLogix processor to a CompactLogix processor. The CLX has an ENBT connected to the plant Ethernet. The CPX is connect via DF1 to an ENI which is then connected to the plant Ethernet.
In the MSG block of the CLX, the communications path is:
<ENBT Name>, 2, <IP of ENI>, ?, ?
I thought DF1 would be port 2 or 3 and then backplane would be 0 but maybe I'm missing a step. Do I need to go out on the ? port of the ENI then to the DF1 then to the backplane?
I am trying to write a DINT value from a ControlLogix processor to a CompactLogix processor. The CLX has an ENBT connected to the plant Ethernet. The CPX is connect via DF1 to an ENI which is then connected to the plant Ethernet.
In the MSG block of the CLX, the communications path is:
<ENBT Name>, 2, <IP of ENI>, ?, ?
I thought DF1 would be port 2 or 3 and then backplane would be 0 but maybe I'm missing a step. Do I need to go out on the ? port of the ENI then to the DF1 then to the backplane?