mcdillon86
Member
Hi I need help with reading from a plc 5. I have a jam sequence that is in the PLC 5 but need it so be messaged to PLC 500. I am new the plc world and would like to save the company money by not having to run 400Ft of conduit and wire for a light if I can just use an empty output on the sick 500 by the area im needing to put a jam light. Any help or links to a description on this process is much appreciated.
I have attached a picture of the jam sequence that I wrote for an output as a test.
I have attached a picture of the jam sequence that I wrote for an output as a test.