Need a little HELP

Also, it's a standard cutout size for door mounted instruments like...

1/4 DIN (96mm X 96mm)
1/8 DIN (48mm X 48mm)

I think those are the dimensions, and there are a few more I don't use too often
 

Similar Topics

D
Pulse Width Modulation for CL2 dosing; nearly figured out, just need a little help
Hey guys, I have a client that has a v-notch chlorinator that doesn't run off a 4-20mA loop, it instead has two discrete inputs that drive the...
Replies
6
Views
1,895
OkiePC
OkiePC
C
My First program! and I need a little help
I was given a small PLC project from my dad for his company and I have ran into a few problems. I have found it necessary to use an output in my...
Replies
12
Views
3,882
Lancie1
Lancie1
R
A little puzzle - need help solving compactlogix
I am using a compactLogix PLC. We built a conveyor system now we have added an end of line sorter. Yes an add on and no one has thought of how it...
2
Replies
19
Views
7,579
OkiePC
OkiePC
M
need a little help
I need to use a contrologix 1100 to index a stepping motor. I will be using a IMS (intelligent motion systems) stepper driver and using the 1100...
Replies
0
Views
1,185
mike christen
M
2
Need a little help
Hello everyone, I want to know what I am doing wrong when trying to upload a program from a pv+1000 on a dh+ network. The 5/04 and HMI or talking...
Replies
2
Views
1,455
2bru
2
Back
Top Bottom