wildswing
Member
I'm having trouble configuring my 1734-OE4C 4ch analog out modules. I've read the docs but details on configuration is sketchy at best, at least what I can find.
If I leave the output module's channel low and high engineering values at their default of 1638 & 8191, all seems ok. I type in a value of 4915 and get close to 12 mA out. If I change those limits to 0 and 1000, which is what I want, and type in 500, the channel goes to 0 mA out. Everything else in the modules config has been left at the default value.
This over CNet. 1734-ACNR is set up as rack optimized because of a mix of analog out and discrete out.
What am I missing here?
If I leave the output module's channel low and high engineering values at their default of 1638 & 8191, all seems ok. I type in a value of 4915 and get close to 12 mA out. If I change those limits to 0 and 1000, which is what I want, and type in 500, the channel goes to 0 mA out. Everything else in the modules config has been left at the default value.
This over CNet. 1734-ACNR is set up as rack optimized because of a mix of analog out and discrete out.
What am I missing here?