Hi all, I heard some cool things today regarding network switch diagnostics (i had usually always brushed over these without much thought.)
I was wondering if anyone else had some go-to fault finding rules?
CRC errors only -> Media issue (Check cabling / Connections)
CRC and FRAGMENT errors (similar numbers for each) -> Check duplex/auto-negotiation settings
RX Jabbers errors only ->Media issue (Check cabling / Connections)
I was wondering if anyone else had some go-to fault finding rules?
CRC errors only -> Media issue (Check cabling / Connections)
CRC and FRAGMENT errors (similar numbers for each) -> Check duplex/auto-negotiation settings
RX Jabbers errors only ->Media issue (Check cabling / Connections)