Network Switch Diagnostics

moistcat

Member
moistcat
Join Date
Jun 2020
Location
Melbourne
Posts
54
Hi all, I heard some cool things today regarding network switch diagnostics (i had usually always brushed over these without much thought.)
I was wondering if anyone else had some go-to fault finding rules?

CRC errors only -> Media issue (Check cabling / Connections)
CRC and FRAGMENT errors (similar numbers for each) -> Check duplex/auto-negotiation settings
RX Jabbers errors only ->Media issue (Check cabling / Connections)
 

Similar Topics

A
Network switch recommendations
Hello, I have a A.B Compact logix communicating with two fanuc robots via ethernet. The plc also communicates to an automation direct hmi screen...
Replies
3
Views
140
James Mcquade
J
mad4x4
Network Switch supplier USA
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Replies
6
Views
178
joseph_e2
J
AutomationTechBrian
Machine Network: Managed switch, DLR??
I've never used a managed switch before, and I've never configured a DLR before. On my current extruder rehab project, I'm thinking about both...
2
Replies
16
Views
5,057
mk42
M
S
Advice on Network/Switch Configuration
I have an assembly line that I've been adding to and upgrading over the last year or so. I am starting to have intermittent problems with...
Replies
8
Views
3,755
Phil Buchanan
Phil Buchanan
einnh
Shallow DIN mount network switch
I am trying to find a shallow (<85mm depth) network switch. Trying to keep width under 70mm. Height is flexible. Unmanaged or managed is okay for...
2
Replies
16
Views
4,029
JesperMP
JesperMP
Back
Top Bottom