I migrated from a 1771-IFE to a 1756-IF16 using the conversion kit about 6 months ago. Everything seems to be working except when I went back and observed the trending there is a lot of noise. I am not sure the data is WRONG its just sampling too fast now maybe. My IFE was set up with no RTS and 0.09s of digital filtering(I did not configure this). The new one was just default to 500ms of filtering and 100ms RTS.
What would the RTS be if it is default or not selected on the IFE? Anything else I should be considering?
What would the RTS be if it is default or not selected on the IFE? Anything else I should be considering?
