Hello all!
I hawe a noob question.
Im noob in Omron programing but before i was work much with siemens.
The question is.
When i program the siemens S7 300 PLC and i want to work with the inside memory addreses than i use the M30.0 example... or if i want to address a phisical input or output i use teh I10.0 or our Q11.0 and thats it.Or W for words, D for digital...
But in the Omron is somehow diferent. How are they using these addresses example for addressing an inside memory area like in siemens? For out and input i know that they are using the IN :0.00 to 99.00 or out form 100.00 to 200.00 exaple... and is that mabe the W (work area) ? is W10.00 same like 10.00?
or W10.00 is same like in Siemens the M10.00?? thanx im so confused...
i hope that someone undertand the question
and sorry for my bad enlgish.
Best regards Arpad
I hawe a noob question.
Im noob in Omron programing but before i was work much with siemens.
The question is.
When i program the siemens S7 300 PLC and i want to work with the inside memory addreses than i use the M30.0 example... or if i want to address a phisical input or output i use teh I10.0 or our Q11.0 and thats it.Or W for words, D for digital...
But in the Omron is somehow diferent. How are they using these addresses example for addressing an inside memory area like in siemens? For out and input i know that they are using the IN :0.00 to 99.00 or out form 100.00 to 200.00 exaple... and is that mabe the W (work area) ? is W10.00 same like 10.00?
or W10.00 is same like in Siemens the M10.00?? thanx im so confused...
i hope that someone undertand the question
and sorry for my bad enlgish.
Best regards Arpad