sigmadelta
Member
Yes, and it looks like AR2509 is actually off. Hmm...
Is the CPU still showing "Standby"?
Is the CPU still showing "Standby"?
Omron C200HS not in run mode
- Thread starter heritageequipment
- Start date
heritageequipment
Member
OP
Yes, it says Monitor mode - Standby at bottom, and it says Stopped in the very top window header
sigmadelta
Member
I sent you a private message with a contact that lives about an hour from you - and may even be in the area today.
heritageequipment
Member
OP
Thank you so much, I will call him.
I got it to go into run mode by removing the ASC02 card. Half of the machines functions work now, but some of the automated functions do not work since that ASC02 card connects to the servo controllers. I wonder if this ASC02 coprocesser thingy lost its program.
I got it to go into run mode by removing the ASC02 card. Half of the machines functions work now, but some of the automated functions do not work since that ASC02 card connects to the servo controllers. I wonder if this ASC02 coprocesser thingy lost its program.
Similar Topics
Saludos amigos.
Tengo una impresora comexi modelo FS1500, la impresora usa intouch 7 en Windows 2000, viene con un PLC Omron C200HS, también usa...
Hello,
New to this forum and to Omron. Really hoping someone has some input or advice that I haven't already tried. Have exhausted all I could...
Hi folks
Looking to connect an Omron C200HS to Kepserver using the Peripheral port and the CQM1-CIF02 programming lead. I want to try and use...
Hi all,
I have a few old Omron SYSMAC C200HS CPU01 PLC's and am trying to learn what is req'd in order to communicate with them. I have an...
Hi I am uploading from an Omron c200hs and I cannot retrieve any comments. We don't have an original program on hand to follow from with regard to...