Omron CJ1M/ETN21 VPN access

shaulapto

Member
S
Join Date
Feb 2004
Location
Raanana,Israel
Posts
53
I'm trying to configure the Omron ETN21 ethernet module to access it trough VPN without success.
I am able to connect to other PLC's in the same network and also to connect to the moudule locally but not remotely trough VPN.
I know the problem could be in the routing table but it is not so clear to me how to arrange it.
May be some of you have done this connection before and could help.
Thanks
 

Similar Topics

A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
256
IO_Rack
IO_Rack
A
Omron CJ1M CPU11 ETN
hi dear all hope you all are fine I have a problem with my CJ1M cpu11 ETN. it stop communication with PC over ethernet. ETN unit all indications...
Replies
4
Views
175
Nafir
N
A
OMRON CJ1M CPU11 Program Upload
Hello everyone. I am new when it comes to Omron PLCs. Currently I'm uploading program from CJ1M PLC using CS1W-CIF31 cable only. I connected the...
Replies
2
Views
167
AndrewThu129
A
E
Fix omron cj1m INH lit error
i have been trying to connect to omron cj1m via peripheral port(USB to Serial), but there isn't any sign to show that it has connected, so am...
Replies
0
Views
323
emmanuelit
E
W
omron cj1m-cpu12 error code 31
Has anyone encountered an error code 31 on an omron cj1m-cpu12? This error code is not covered in PLC manual.
Replies
1
Views
523
lostcontrol
L
Back
Top Bottom