WallyPrestone Member W Join Date Aug 2005 Location Torrance, CA Posts 121 Jan 10, 2018 #1 My Omron PLC (SYSMAC CS1G) could not get the RUN light until I remove the Remote I/O Unit CS200H-RM201 - How can I test the communication between RM201 and RT201 - I just replaced the RM201 module and RT201 next - Thanks
My Omron PLC (SYSMAC CS1G) could not get the RUN light until I remove the Remote I/O Unit CS200H-RM201 - How can I test the communication between RM201 and RT201 - I just replaced the RM201 module and RT201 next - Thanks
WallyPrestone Member OP W Join Date Aug 2005 Location Torrance, CA Posts 121 Jan 10, 2018 #2 What is the best way to check the RM201 and RT201 mudules / Thanks
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,557 Jan 10, 2018 #3 Send them to Omron for testing. Typically the RT201 fails. These have not been manufactured or supported for years and are no longer available.
Send them to Omron for testing. Typically the RT201 fails. These have not been manufactured or supported for years and are no longer available.
WallyPrestone Member OP W Join Date Aug 2005 Location Torrance, CA Posts 121 Jan 11, 2018 #4 Thanks I try to get the replacement unit
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,557 Jan 11, 2018 #5 Good luck - been dead for a long time now!